TOPONE® can produce G70 chain for Manure Scraper chain. Fully compliant with DIN 32895 standard. Round steel link chains for car loaders and manure spreaders, calibrated, tested.

TOPONE® produces Flat link chains for use in continuous conveyors in mining Complies with DIN22255 dimensions and mechanical properties. Flat link mining chains may replace currently used round link chains of the same diameter, without the need of changing other assembly components.Especially suitable for Armored Face Conveyors, Beam Stage Loaders, road headers.

TOPONE® uses DIN 22252 standard to produce round steel chain links for continuous conveyors and excavation equipment in the mining industry. The steel used to produce the welded round link chain contains alloy elements such as Cr Ni Mo. It can meet Grade D (1050MPa), Grade C++ (900MPa), and Grade C (800MPa).Suitable for Armored Face Conveyors (AFC), Beam Stage Loaders (BSL), road header machines, coal plows and other equipment that requires this type of chain.

TOPONE® can produce long link steel chain in accordance with DIN 763 standard. We can also produce extra long link chain pitch 8D. Can provide Self color and hot dipped galvanized and electro galvanized finish. Suitable for lashing or safety guardrail, etc.

TOPONE® can produce medium ring steel chains in accordance with DIN 764 dimensions, pitch 3.5D. Grade 3, Grade 4, Grade 6, Grade 8, calibrated and tested. Surface hardening is also available, up to 64HRC. Especially suitable for industrial conveyor chains and wear chains.

TOPONE® can provide Self color and hot dipped galvanised and electro galvanised finish . Calibrated and tested grade 3 round steel short link chains.For use in all industrial sectors.Special chains also available in grades 4,5, 6,7,8,10 and hardened surfaces (MAX 64HRC)

Ordinary alloy steel chain with medium tolerance. It can be used for Overhead Lifting.

The material contains alloy elements such as CR, NI, MO, etc.,

and fully complies with the requirements of EN818-2/ASTM A973/NACM2010.

It can be treated with anti-rust treatment such as electrophoresis, electroplating, powder coating, etc.

High quality alloy steel chain with medium tolerance. Can be used for Overhead Lifting.

The material contains a higher proportion of CR, NI, MO and other alloy elements.

At the same weight, the strength is 25% of the G80 chain.

Fully meets the requirements of PAS 1061/NACM2010 G100.

Anti-rust treatments such as electrophoresis, electroplating, and powder coating can be performed.

TOPONE® case-hardened chain for chain hoists. Produced and tested to Japanese standards.Tight tolerances