TOPONE® can produce medium ring steel chains in accordance with DIN 764 dimensions, pitch 3.5D. grade 3, grade 4, grade 6, grade 8, calibrated and tested. Surface hardening is also available, up to 64HRC. Especially suitable for industrial conveyor chains and wear chains.

TOPONE® can provide Self color and hot dipped galvanised and electro galvanised finish . Calibrated and tested grade 3 round steel short link chains.For use in all industrial sectors.Special chains also available in grades 4,5, 6,7,8,10 and hardened surfaces (MAX 64HRC)

Ordinary alloy steel chain with medium tolerance. It can be used for Overhead Lifting.

The material contains alloy elements such as CR, NI, MO, etc.,

and fully complies with the requirements of EN818-2/ASTM A973/NACM2010.

It can be treated with anti-rust treatment such as electrophoresis, electroplating, powder coating, etc.

High quality alloy steel chain with medium tolerance. Can be used for Overhead Lifting.

The material contains a higher proportion of CR, NI, MO and other alloy elements.

At the same weight, the strength is 25% of the G80 chain.

Fully meets the requirements of PAS 1061/NACM2010 G100.

Anti-rust treatments such as electrophoresis, electroplating, and powder coating can be performed.

TOPONE® case-hardened chain for chain hoists. Produced and tested to Japanese standards.Tight tolerances

Short link chain for lifting by TOPONE®. Meets the requirements of EN818-7 T DAT DT for accuracy and surface hardness. High-precision calibration by fully automatic servo calibration machine. Chain carburized to increase surface hardness. Particularly suitable for electric chain hoists.

Used for ship deck lashing and log lashing. It is still tested with 2.5 times the safe load before leaving the factory, but we do not recommend it for lifting work. It can be sold with various hooks and chain tensioners.

Premium, high strength alloy chain, heat treated for use in a variety of sling and tie down applications.

For overhead lifting applications, use only alloy chain. 100% compliant with NACM2010 requirements for grade 80 chain.

The size of TOPONE® Medium Link Chain is designed according to DIN764. The working load and breaking load are produced according to grade 80 chain. The use of alloy steel makes the chain performance more stable and reliable. However, due to the problem of chain size, we do not recommend using it for lifting work.

Industrial chain for lashing and protection in any scenario. Still tested to 2.5 times the safe load before leaving the factory, but we do not recommend it for lifting work. Can be sold with a variety of hooks and chain tensioners.